With the continuous improvement of KINGREAL production technology design, heavy duty steel slitting machine can not only complete the basic slitter winding work, currently for labor saving, improve the coil push as well as improve the coil push as well as improve the slitting shearing precision and the quality of the slit above there is a significant improvement.
In the use of heavy duty slitting machine, in the enhancement of safety and other aspects have also been very significant improvement.
Then about this series of productivity improvements in the end how to do, a brief introduction to it:
1. Longitudinal shearing machine on the right blocking arm and support arm, about this longitudinal shearing machine is also can be used for trimming straight, used as a front blocking material and support the longer sheet are its right blocking arm credit. But the support arm is mainly the front of the longitudinal shear to support the material, not only that, the equipment can also be used with the appropriated front stopper together to measure the role of the shear parts.
2. In addition to the positive blocking arm and support, for the longitudinal shearing machine on the sheet support device is bound to be directly on the play the same effect. But this time we also want to pay attention to this device is installed in the back of the blade, so that the material against the back of the blocking material and the material to play a supporting role, so that is to prevent the material from sagging, to ensure the accurate position of the cut.
3. In the lubrication system. Slitting machine will also have a manual centralized lubrication system, This time will also be in the same position on a number of lubrication position to provide the right amount of lubrication, a good degree of lubrication makes the equipment used more smoothly.
4. After that, there will be a more important point is the longitudinal shearing machine between the gap adjustment, it itself is divided into two kinds of manual and automatic. Of course, no matter which one, that is, can be better on the completion of the knife gap on the reverse side of the adjustment, so that is can be cut with the thickness of the material to be cut, size, type of want to comply with, to improve the effect of shear. There are many, many, these devices even if you look at it alone is not very eye-catching, but used in the longitudinal shearing machine equipment, the effect is very obvious.
