スリッター機の熱問題を解決するには?

---

Sometimes in the use of steel coil slitting machine, there will be the phenomenon of heat, this time we should that take what kind of method to solve it, the following look at the causes of slitting line heat and measures to solve:

 

Slitting machine heating causes:

 

1. Pressure adjustment is too high, making the flattening machine speed becomes fast, thus causing the seal ring and side plate burned;

2. The oil tank of the flattening machine itself is too small, making the heat dissipation conditions poor;

3. Due to excessive axial clearance or damage to the sealing ring thus causing internal leakage

 

Stainless Steel Coil Slitting Machine will break down after using for a period of time, then in the daily production to maintain the flattening machine, to extend its service life:

 

1. Strictly in accordance with the operating procedures for operation.

2. The flattening machine needs to be kept clean often, unpainted part of the anti-rust grease.

3. Each time before starting the machine according to the requirements of the lubrication chart at regular intervals, fixed points, quantitative adding lubricating oil, oil should be clean without precipitation.